Keep your ICP N4A336AKB200 packaged unit running efficiently with genuine OEM replacement parts from Repair Clinic. The N4A336AKB200 is a three-ton residential packaged unit from the International Comfort Products family. ICP, Heil, Tempstar, Arcoaire, and WeatherKing are all International Comfort Products brand designations sharing the same platform engineering and fully interchangeable service components. The dual run capacitor, contactor, and condenser fan motor account for the vast majority of N4A336AKB200 service calls. Repair Clinic stocks genuine ICP OEM parts for the N4A336AKB200 including the ICP capacitor parts, ICP contactor parts, and ICP fan motor parts. Browse the ICP central air conditioner parts catalog filtered by N4A336AKB200 for the complete parts inventory.
N4A336AKB200: ICP Three-Ton Packaged Unit and ICP Family Brand Equivalence
The ICP N4A336AKB200 shares its platform with Heil, Tempstar, Arcoaire, and WeatherKing models at the same configuration under the International Comfort Products parent company. All service components are interchangeable across all ICP family brand designations. Annual capacitance testing of the dual run capacitor before the cooling season is the most cost-effective preventive maintenance step on this platform.
Most Replaced Parts on the ICP N4A336AKB200
Dual Run Capacitor for the ICP N4A336AKB200
The dual run capacitor provides starting and running torque for both the compressor and condenser fan motor. A capacitor reading more than 10% below its rated microfarad value causes the compressor to hard-start. Match all three microfarad values from the installed capacitor label before ordering.
ICP N4A336AKB200 Contactor
The contactor closes the 240-volt compressor power circuit at every cooling cycle start. Pitted or burned contact surfaces generate heat that transfers to the compressor motor terminals. Replace a contactor with visibly eroded contacts before compressor winding damage occurs.
Condenser Fan Motor for the N4A336AKB200
The condenser fan motor pulls air through the coil. Test the run capacitor before ordering a replacement motor, as a failed capacitor produces identical slow-start symptoms at a fraction of the motor replacement cost.
High-Pressure Switch for the N4A336AKB200
A high-pressure switch that trips repeatedly under normal conditions points to a blocked condenser coil, failed fan motor, or refrigerant overcharge rather than a failed switch.
Why Choose Repair Clinic for ICP N4A336AKB200 Parts
- Genuine ICP OEM Components: Dual run capacitors, contactors, and fan motors confirmed for the N4A336AKB200 with Heil, Tempstar, Arcoaire, and WeatherKing cross-reference ICP central air conditioner parts.
- ICP Family Brand Equivalence: ICP, Heil, Tempstar, Arcoaire, and WeatherKing are all International Comfort Products designations. Parts are cross-catalogued across all brand names.
- Annual Capacitor Testing Priority: Pre-season capacitance testing is the most cost-effective preventive maintenance step for the N4A336AKB200.
- 365-Day Returns: Return any uninstalled ICP part within a full year of purchase with no restocking fees.
ICP N4A336AKB200 Parts FAQ
What is the ICP N4A336AKB200 and what type of unit is it?
The ICP N4A336AKB200 is a three-ton residential packaged unit from the International Comfort Products family. ICP, Heil, Tempstar, Arcoaire, and WeatherKing are all International Comfort Products brand designations that share the same platform engineering and fully interchangeable service components at the same model configuration.
Why does my ICP N4A336AKB200 fan not spin even though the compressor runs?
A unit where the compressor runs but the condenser fan does not spin has most commonly failed at the dual run capacitor, which can no longer provide starting torque to the fan motor winding. Test the fan motor microfarad section of the capacitor independently before ordering a fan motor replacement.
Are ICP N4A336AKB200 parts interchangeable with Heil or Tempstar units?
Yes. ICP, Heil, Tempstar, Arcoaire, and WeatherKing are all International Comfort Products brand designations. The N4A336AKB200 and its Heil and Tempstar equivalents at the same configuration have fully interchangeable service components.
How often should I test the capacitor on the ICP N4A336AKB200?
Test the capacitor annually before the cooling season. A reading more than 10% below the rated microfarad value indicates a weakening capacitor that should be replaced before it fails under peak summer load.
