Shop replacement repair parts for Trane Furnace model TUD100R948A1

Furnace flame sensor. The flame sensor monitors the burner to detect whether or not a flame is present. If the flame sensor is defective, the furnace may not heat.

Stainless steel burner

Run Capacitor, 10 uf, 440 VAC

Transformer; 115v pri, 24v sec., 60hz, 35va, foot mount

Control; fuse link, open at 333 deg f

Blower Motor, 1/2 HP 115 Volts 48 Frame 1075 RPM 4 Speed. Requires 20 MFD Capacitor

Resilient ring, 2 required

Furnace draft inducer motor. The draft inducer motor draws air into the burner and exhausts it out the flue. If the draft inducer motor is defective, the furnace may not heat.

Wheel; blower, 10 inch dia x 8 inch width, 1/2 inch

Thermal limit switch, opens at 200 degrees and closes at 170 degrees

Blower wheel 4.72"x1.31" ccw 1/4"bore

Shield;Limit

Extruding screw, sold individually


Screw, 6-32, f, hxw, 1-1/2 s