Shop replacement repair parts for Trane Furnace model TUD100R961H2

Furnace flame sensor. The flame sensor monitors the burner to detect whether or not a flame is present. If the flame sensor is defective, the furnace may not heat.

Stainless steel burner

Run Capacitor, 10 uf, 440 VAC

Hot surface furnace ignitor with plug on connector

Transformer; 115v pri, 24v sec., 60hz, 35va, foot mount

Control; fuse link, open at 333 deg f

Gasket; venter assembly

Door switch, 21 amps, 125/250 vac

10 in diameter x 10 in width. .50 BC. Clockwise rotation

Gas valve 1/2" 24v 2stg j-series

Brass orifice spud, drill #45

Resilient ring, 2 required

Switch; thermal limit, open at 210, close at 180 deg

Furnace draft inducer motor. The draft inducer motor draws air into the burner and exhausts it out the flue. If the draft inducer motor is defective, the furnace may not heat.

Air Filter, 25" x 24" x 1". Permanent