Shop replacement repair parts for Trane Furnace model TUD120R954A2

Furnace flame sensor. The flame sensor monitors the burner to detect whether or not a flame is present. If the flame sensor is defective, the furnace may not heat.

Run Capacitor, 10 uf, 440 VAC

Transformer; 115v pri, 24v sec., 60hz, 35va, foot mount

Switch;thermal limit, open at 260, close at 230 deg

Hot Surface Ignitor with 11" leads, Y Style Mounting Block, Oblong Base, Insulation 200°C, Stripped Ends, Includes Ceramic Wire Nuts, Includes Gasket. Replaces R/S 41-406

3/4HP 115Volts 60Hz 12 amp 1075 RPM's 4 Speed Open Enclosure 48Y Frame Single Phase CCW 3" Shaft

Blower housing assembly

Furnace draft inducer motor. The draft inducer motor draws air into the burner and exhausts it out the flue. If the draft inducer motor is defective, the furnace may not heat.

Blower Assembly. Includes the blower motor, blower wheel, capacitor and blower housing.

Switch; pressure 24v spno -.55"op -.65"cl

Wire harness unit, includes igniter harness

Valve;gas, 2 stage, 1/2 in. x 1/2 in.