Shop replacement repair parts for Trane Furnace model TUE040A924H1

Stainless steel burner

Hot surface furnace ignitor with plug on connector

Transformer; 115v pri, 24v sec., 60hz, 35va, foot mount

Control; fuse link, open at 333 deg f

Capacitor; run, 7.5 mfd, 440v oval, w/o resistor

Draft Inducer Motor, 1 stage. The draft inducer motor draws air into the burner and exhausts it out the flue. If the draft inducer motor is defective, the furnace may not heat.

Gasket; venter assembly

Pressure switch SPNO 50" WC

Door switch, 21 amps, 125/250 vac

Switch;thermal limit, open at 170, close at 140 deg

Brass orifice spud, drill #45

Resilient ring, 2 required

Filter; permanent, 25 x 16.5 x 1in.

Blower motor, 1/5 HP, 115 volts, 1080 RPM's, 4 speed, 60 herta, 1 phase, counterclockwise rotation
