Shop replacement repair parts for Trane Furnace model TUE100A948H1

Stainless steel burner

Run Capacitor, 10 uf, 440 VAC

Hot surface furnace ignitor with plug on connector

Transformer; 115v pri, 24v sec., 60hz, 35va, foot mount

Control; fuse link, open at 333 deg f

Draft Inducer Motor, 1 stage. The draft inducer motor draws air into the burner and exhausts it out the flue. If the draft inducer motor is defective, the furnace may not heat.

Gasket; venter assembly

Pressure switch SPNO 50" WC

Door switch, 21 amps, 125/250 vac

Blower Motor, 1/2 HP 115 Volts 48 Frame 1075 RPM 4 Speed. Requires 20 MFD Capacitor

Brass orifice spud, drill #45

Gasket;collector box

Resilient ring, 2 required

Switch; reverse flow, open 140f, close 130f,

Wheel; blower, 10 inch dia x 8 inch width, 1/2 inch