Shop replacement repair parts for Trane Furnace model TUE100A948L3

Furnace flame sensor. The flame sensor monitors the burner to detect whether or not a flame is present. If the flame sensor is defective, the furnace may not heat.

Stainless steel burner

HSI control module with four wire leads The HSIcontrol module regulates the supply of power to the furnace components. Be sure to check more commonly defective parts before replacing the control board.

Flame rollout switch. Push red button to reset. L310

Run Capacitor, 10 uf, 440 VAC

Hot surface furnace ignitor with plug on connector

Gas Valve Assembly
Please see related items for gas valve adapter kit

Draft Inducer Motor, 1 stage. The draft inducer motor draws air into the burner and exhausts it out the flue. If the draft inducer motor is defective, the furnace may not heat.

Gasket; venter assembly

Pressure switch SPNO 50" WC

Door switch, 21 amps, 125/250 vac

Blower Motor, 1/2 HP 115 Volts 48 Frame 1075 RPM 4 Speed. Requires 20 MFD Capacitor

Brass orifice spud, drill #45

Resilient ring, 2 required

Wheel; blower, 10 inch dia x 8 inch width, 1/2 inch