Shop replacement repair parts for Trane Furnace model TUH1C080A9601AA

Furnace flame sensor. The flame sensor monitors the burner to detect whether or not a flame is present. If the flame sensor is defective, the furnace may not heat.

Stainless steel burner

Switch; switch-flame rollout, 82 degrees c, 180 deg

Integrated single-stage furnace control board. The control board regulates the supply of power to the furnace components. Be sure to check more commonly defective parts before replacing the control board.

Blower Wheel 11.7 by 10.6 inches.

Door switch, 21 amps, 125/250 vac

Thermal Limit Switch

Brass orifice spud, drill #45

Natural Gas To LP Gas Conversion Kit. Kit includes, 7 orifice main burner #56, 1 LP spring conversion kit, 1 propane label, 1 conversion label, 1 conversion responsibility label, 1 installer's guide. *Should be installed by a certified Trane repairperson.

Switch; limit inducer

Grommet, burner box entry seal

Receptacle; transition including four mounting scre

Draft inducer motor, one stage, ball bearing.The draft inducer motor draws air into the burner and exhausts it out the flue. If the draft inducer motor is defective, the furnace may not heat.

Blower motor, 3/4HP, 115 volts, 60 hertz, 9.6 amps 1075 RPM's, 4 Speed Open Enclosure, 48Y Frame, Single Phase CCW 3" Shaft

Filter; replacement filter rack assembly