Shop replacement repair parts for Trane Furnace model TUH2B060A9V3VBA

Furnace flame sensor. The flame sensor monitors the burner to detect whether or not a flame is present. If the flame sensor is defective, the furnace may not heat.

Stainless steel burner

Thermal limit switch, open at 180 degrees, close at 150 degrees

Switch; switch-flame rollout, 82 degrees c, 180 deg

Door switch, 21 amps, 125/250 vac

Gas valve

Inducer blower motor, three phase.The draft inducer motor draws air into the burner and exhausts it out the flue. If the draft inducer motor is defective, the furnace may not heat.

Brass orifice spud, drill #45

Natural Gas To LP Gas Conversion Kit. Kit includes, 7 orifice main burner #56, 1 LP spring conversion kit, 1 propane label, 1 conversion label, 1 conversion responsibility label, 1 installer's guide. *Should be installed by a certified Trane repairperson.

Gasket;collector box

Switch; dual pressure, 28 va pilot duty 24 vac, 125v

Switch; limit inducer

Wheel; blower, 10 inch dia x 8 inch width, 1/2 inch

Furnace control board. The control board regulates the supply of power to the furnace components. Be sure to check more commonly defective parts before replacing the control board.

Receptacle; transition including four mounting scre