Shop replacement repair parts for Trane Furnace model TUH2C100A9V4VAB

Furnace flame sensor. The flame sensor monitors the burner to detect whether or not a flame is present. If the flame sensor is defective, the furnace may not heat.

Stainless steel burner

Thermal limit switch, open at 180 degrees, close at 150 degrees

Switch; switch-flame rollout, 82 degrees c, 180 deg

Dual Pressure Switch

Door switch, 21 amps, 125/250 vac

Gas valve

Inducer blower motor, three phase.The draft inducer motor draws air into the burner and exhausts it out the flue. If the draft inducer motor is defective, the furnace may not heat.

Brass orifice spud, drill #45

Natural Gas To LP Gas Conversion Kit. Kit includes, 7 orifice main burner #56, 1 LP spring conversion kit, 1 propane label, 1 conversion label, 1 conversion responsibility label, 1 installer's guide. *Should be installed by a certified Trane repairperson.

Switch; limit inducer

Receptacle; transition including four mounting scre

3/4 hp 1800 rpm blower motor

Filter; replacement filter rack assembly

Filter; frame assembly