Shop replacement repair parts for York Furnace model P3HUC20L06401B/01-1998

Furnace control board. The control board regulates the supply of power to the furnace components.

Furnace hot surface igniter kit. The igniter gets very hot and glows bright orange to light the gas burner. If the igniter is cracked or defective, the furnace won’t heat.

Furnace flame sensor. The flame sensor monitors the burner to detect whether or not a flame is present. If the flame sensor is defective, the furnace may not heat.

Pressure switch -.5" WC SPNO

Furnace blower motor. This single-phase motor has the following specifications:
Horsepower: 1
Voltage: 115
Full-Load Amperage: 14.4
Hertz: 60
RPM: 1075
Speeds: 4
Rotation: Counterclockwise
Frame: 48
Enclosure: Open
Shaft Length: 3"

Gas valve kit

High limit thermostat -140 open, 110 close

Run capacitor, Single, Oval, 370 Volts, 15 Microfarads

Flame rollout limit switch 185 degrees F open, manual reset

Transformer, 120 volt primary 24 volt secondary 40 va

Flame rollout limit switch 320 degrees F open, manual reset

Furnace draft inducer motor. The draft inducer motor draws air into the burner and exhausts it out the flue. If the draft inducer motor is defective, the furnace may not heat.

Flame rollout limit switch. 350 degrees F Open, Manual Reset

Blower housing

Pressure switch kit,high altitude