Price Match GuaranteeColeman Furnace LM8S130D20DN11A Parts
Shop replacement repair parts for Coleman Furnace model LM8S130D20DN11A
Furnace control board. The control board regulates the supply of power to the furnace components.
Gas Burner Tube
Furnace hot surface igniter kit. The igniter gets very hot and glows bright orange to light the gas burner. If the igniter is cracked or defective, the furnace won’t heat.
Furnace flame sensor. The flame sensor monitors the burner to detect whether or not a flame is present. If the flame sensor is defective, the furnace may not heat.
Blade fuse. ATC-3 (3 Amp)
Draft inducer blower assembly. 60 Hz 1.75 Amps, 3000 RPM.The draft inducer blower draws air into the burner and exhausts it out the flue. If the draft inducer motor is defective, the furnace may not heat.
Furnace blower motor. This single-phase motor has the following specifications:
Horsepower: 1
Voltage: 115
Full-Load Amperage: 14.4
Hertz: 60
RPM: 1075
Speeds: 4
Rotation: Counterclockwise
Frame: 48
Enclosure: Open
Shaft Length: 3"
Gas valve kit
Pressure switch tubing .313 OD .188 ID
Blower wheel, 11 x 10, cw, 1/2 bore
Orifice,burner drill size 45
Run capacitor, Single, Oval, 370 Volts, 15 Microfarads
Pressure switch
Limit Switch
Transformer, 120 volt primary 24 volt secondary 40 va
Frequently Purchased Together For This Model
Family-owned and operated since 1912, Burke America Parts Group is the longest-running genuine appliance, HVAC, and outdoor power equipment parts solution in North America. At Repair Clinic, we're proud to be an international brand trusted by the pros as well as the DIY community.
About Repair Clinic