Shop replacement repair parts for Coleman Furnace model UGAE075BUB

Furnace control board. The control board regulates the supply of power to the furnace components.

Furnace hot surface igniter kit. The igniter gets very hot and glows bright orange to light the gas burner. If the igniter is cracked or defective, the furnace won’t heat.

Run capacitor, single,10mfd,370 volts, oval

Furnace blower motor. This single-phase motor has the following specifications:
Horsepower: 1/2
Voltage: 115
Full-Load Amperage: 7.7
Hertz: 60
RPM: 1175
Speeds: 4
Rotation: Counterclockwise
Frame: 48
Enclosure: Open

Pressure switch -.5" WC SPNO

Furnace flame sensor. The flame sensor monitors the burner to detect whether or not a flame is present. If the flame sensor is defective, the furnace may not heat.

Flame rollout limit switch

Transformer 120v-pri 24v-sec 40va

Blower motor mounting kit

Blower wheel, 10 x 10 , CW, 1/2" bore

Natural gas burner 1 tube

Thermostat 1C26-101 •1 Heat,1 Cool •24 Volts •Snap-Action •System Switch - Heat, Off, Cool •Fan Switch-Auto, Continuous •Profile-Vertical Rounded •Range 50-90°F •MERCURY FREE

Furnace draft inducer motor. The draft inducer motor draws air into the burner and exhausts it out the flue. If the draft inducer motor is defective, the furnace may not heat.

Vent blower gasket

Gas Valve Assembly