Shop replacement repair parts for Luxaire Furnace model PBKM-LD20N120E

Furnace control board. The control board regulates the supply of power to the furnace components.

Run capacitor, single,10mfd,370 volts, oval

Furnace flame sensor. The flame sensor monitors the burner to detect whether or not a flame is present. If the flame sensor is defective, the furnace may not heat.

Universal Gas Valve, HSI/DSI Single Stage, Slow Opening, Inlet / Outlet Pressure Taps, Plastic Hose Barb (For Connection To ¼ Hose/Flexible Tubing), LP Gas Conversion Kit, Inlet/Outlet Reducer Bushings (1/2 NPT X 3/8 NPT) 100KBTU/Hr (Nat Gas), 24V, 60 Hz, 1/2 X 1/2 NPT, Replaces 36G24-214

3/4HP 115Volts 60Hz 11 amp 1060 RPM's 3 Speed Open Enclosure 48Y Frame Single Phase CCW 3.5" Shaft

Limit themrostat switch

Flame rollout limit switch 185 degrees F open, manual reset

Transformer, 120 volt primary 24 volt secondary 40 va

Flame rollout limit switch 320 degrees F open, manual reset

Limit switch, 370 open, manual re-set

Pressure switch

Igniter kit with bracket, screw, and adapter

Furnace draft inducer motor. The draft inducer motor draws air into the burner and exhausts it out the flue. If the draft inducer motor is defective, the furnace may not heat.

Housing blower 11-10