Homelite String Trimmer UT33600 Parts

Shop replacement repair parts for Homelite String Trimmer model UT33600

icons/string trimmer
Brand:Homelite
Model:UT33600
Product:String Trimmer
85 results
Skill Level (1)
skill level dotskill level dotskill level dotskill level dot
Product is a manufacturer part
852 Spark Plug
$7.88

Champion spark plug (RCJ6Y). The spark plug ignites the fuel and air mixture in the engine's cylinder to power the engine. If the spark plug is has fouled (if the tip of the spark plug is burnt or damaged), the engine may not start or may run rough.

Skill Level (2)
skill level dotskill level dotskill level dotskill level dot
Product is a manufacturer part
638033001 Rewind Spring
$7.63

Homelite rewind spring (recoil spring) and container. If the rewind spring is broken, the starter rope won't retract.

Skill Level (1)
skill level dotskill level dotskill level dotskill level dot
Product is a manufacturer part
308042003 Bump Knob
$9.98

String trimmer bump knob (or spool retainer) with left-hand threads. Color: red.

Skill Level (1)
skill level dotskill level dotskill level dotskill level dot
Product is a manufacturer part
06713 Compression Spring
$1.72

Homelite compression spring. Pushes bump knob back out after string is released.

Skill Level (2)
skill level dotskill level dotskill level dotskill level dot
Product is a manufacturer part
901551001 Intake Manifold Gasket
$1.72

Two-cycle engine intake manifold gasket. If the intake gasket is torn or damaged, the engine may run rough.

Skill Level (2)
skill level dotskill level dotskill level dotskill level dot
Product is a manufacturer part
901552001 Carburetor Gasket
$1.72

Homelite carburetor gasket. If this gasket is torn or damaged, the engine may run rough. Be sure to clean the surfaces around the carburetor gasket before installing it.

Go

Homelite UT33600 Problems & Repair Solutions

There are only a handful of issues that crop up with most appliances and equipment. Since 1912, we've learned to recognize the most common Homelite UT33600 problems ― and their solutions. Do any of these look familiar?

Frequently Purchased Together For This Model

Spark Plug
Rewind Spring
Bump Knob
Compression Spring

Restore your Homelite UT33600 string trimmer to reliable operation with genuine OEM replacement parts from Repair Clinic. The UT33600 is a straight-shaft two-stroke gas string trimmer from Homelite. The carburetor, air filter, fuel filter, spark plug, and trimmer head are the most frequently serviced components. Repair Clinic stocks genuine Homelite OEM parts for the UT33600 including the Homelite trimmer carburetor parts, Homelite trimmer air filter parts, Homelite trimmer spark plug parts, and Homelite trimmer string head parts. Browse the Homelite string trimmer parts catalog filtered by UT33600 for the complete parts inventory.

Homelite UT33600: Two-Stroke Straight-Shaft Trimmer Service

The Homelite UT33600 uses a two-stroke engine requiring a premixed fuel and oil ratio as specified in the owner’s manual. Carburetor varnish from ethanol-blend fuel during off-season storage is the leading cause of hard starting and stalling at the start of the trimming season. The string trimmer repair help section covers UT33600 carburetor service, fuel filter replacement, and trimmer head line winding.

Most Replaced Parts on the Homelite UT33600

Carburetor for the Homelite UT33600

The UT33600 diaphragm carburetor is susceptible to varnish deposits from ethanol-blend fuel during off-season storage. Cleaning restores function in most cases. When the diaphragm has hardened or cracked, carburetor replacement is the most reliable solution.

Spark Plug for the UT33600

Annual spark plug replacement maintains reliable starting. Always use the fuel mixture ratio specified in the UT33600 owner’s manual.

Air Filter for the Homelite UT33600

Replace the air filter at the start of each trimming season. A clogged filter causes the engine to run rich and lose cutting power at full throttle.

Trimmer Head for the UT33600

The bump-feed trimmer head advances line when tapped against the ground. Replace the head when the bump knob mechanism no longer advances line reliably or the head housing is cracked.

Why Choose Repair Clinic for Homelite UT33600 Parts

  • Genuine Homelite OEM Components: Carburetors, spark plugs, air filters, and trimmer heads confirmed for the Homelite UT33600 two-stroke straight-shaft trimmer Homelite string trimmer parts.
  • Two-Stroke Fuel Mixture Guidance: The UT33600 requires a premixed fuel and oil ratio. Using the wrong ratio causes premature plug fouling and engine damage.
  • Fuel Filter First Diagnostic Guidance: Annual in-tank fuel filter replacement before carburetor disassembly is documented as the most cost-effective first step through string trimmer repair help.
  • 365-Day Returns: Return any uninstalled Homelite part within a full year of purchase with no restocking fees.

Homelite UT33600 String Trimmer Parts FAQ

What is the Homelite UT33600 and what type of trimmer is it?

The Homelite UT33600 is a straight-shaft two-stroke gas string trimmer from Homelite. The UT33600 model code identifies the specific carburetor and fuel system configuration within Homelite’s UT trimmer series.

Why does my Homelite UT33600 not start after off-season storage?

Hard starting after storage is almost always caused by carburetor varnish from ethanol-blend fuel sitting in the float bowl during warm months. Drain the float bowl before off-season storage to prevent this. Replace the fuel filter and clean the carburetor before ordering a replacement.

How do I reload the trimmer head on the Homelite UT33600?

Press the retainer tabs on the bump knob to remove the spool. Wind new line in the direction shown by the arrow on the spool, thread the ends through the eyelets on the head housing, and snap the spool back into place.

Why does my Homelite UT33600 stall under trimming load?

A trimmer that starts but stalls under load most commonly has a clogged high-speed needle jet in the carburetor, a clogged fuel filter, or a cracked fuel line creating an air leak. Replace the fuel filter first before disassembling the carburetor.