Shop replacement repair parts for Amana Packaged Unit/RTU model APG13300701A

Furnace flame sensor. The flame sensor monitors the burner to detect whether or not a flame is present. If the flame sensor is defective, the furnace may not heat.

Contactor, 2 pole, 30 amp, 24 vac **Special Note** This may replace single pole contactor and require a technican to install (based on model #)

Fan Motor 0131M00847S. One-speed, OEM replacement part designed specifically for Goodman and Amana HVAC equipment, like air conditioners, furnaces, and heat pumps. It operates at 1/4 HP, with electrical specifications of 208/230V and 1.4A and a rotation speed of 1075 RPM.

Beckett burner

Gas valve, 24v 3.5" wc

300f m/r rollout limit switch

The Dual Run Capacitor CAP050400440RTP is a round capacitor with a 440-volt rating. If faulty, humidifiers, air conditioners, furnaces, packaged units/RTUs, heat pumps, air handlers, and central air conditioners may overheat. It's compatible with models from Amana and Goodman.

.43 Natural gas burner orifice

10"x8" blower wheel

21.5" fan blade (ccw, 1/2" bore, 25° pitch)

Furnace draft inducer motor. The draft inducer motor draws air into the burner and exhausts it out the flue. If the draft inducer motor is defective, the furnace may not heat.

Pressure switch,(-)0.33pr

Ignition control board. The ignition control board regulates the supply of power to the furnace components. Be sure to check more commonly defective parts before replacing the control board.

Nut, acorn 5/16 hex black

Spark igniter