Shop replacement repair parts for Amana Packaged Unit/RTU model APG13420701A

Furnace flame sensor. The flame sensor monitors the burner to detect whether or not a flame is present. If the flame sensor is defective, the furnace may not heat.

Contactor, 2 pole, 30 amp, 24 vac **Special Note** This may replace single pole contactor and require a technican to install (based on model #)

Fan Motor 0131M00847S. One-speed, OEM replacement part designed specifically for Goodman and Amana HVAC equipment, like air conditioners, furnaces, and heat pumps. It operates at 1/4 HP, with electrical specifications of 208/230V and 1.4A and a rotation speed of 1075 RPM.

Beckett burner

Gas valve, 24v 3.5" wc

.43 Natural gas burner orifice

300f m/r rollout limit switch

Blower wheel, 10"dia 10"w cw 1/2" bore

Furnace draft inducer motor. The draft inducer motor draws air into the burner and exhausts it out the flue. If the draft inducer motor is defective, the furnace may not heat.

Pressure switch,(-)0.33pr

10 mfd cap 440v oval

Ignition control board. The ignition control board regulates the supply of power to the furnace components. Be sure to check more commonly defective parts before replacing the control board.

Blower motor, 1/3 hp, 3 speed, 6pl

Nut, acorn 5/16 hex black

Spark igniter