Shop replacement repair parts for Amana Packaged Unit/RTU model APG1348090M41AC

Furnace flame sensor. The flame sensor monitors the burner to detect whether or not a flame is present. If the flame sensor is defective, the furnace may not heat.

Run capacitor, round 440 volt 45/5 uf

Contactor, 2 pole, 30 amp, 24 vac **Special Note** This may replace single pole contactor and require a technican to install (based on model #)

Fan Motor 0131M00847S. One-speed, OEM replacement part designed specifically for Goodman and Amana HVAC equipment, like air conditioners, furnaces, and heat pumps. It operates at 1/4 HP, with electrical specifications of 208/230V and 1.4A and a rotation speed of 1075 RPM.

Beckett burner

Gas valve, 24v 3.5" wc

.43 Natural gas burner orifice

Furnace draft inducer motor. The draft inducer motor draws air into the burner and exhausts it out the flue. If the draft inducer motor is defective, the furnace may not heat.

Pressure switch,(-)0.33pr

Ignition control board. The ignition control board regulates the supply of power to the furnace components. Be sure to check more commonly defective parts before replacing the control board.

Nut, acorn 5/16 hex black

Spark igniter

Manual reset limit switch

11 x 10" blower wheel

Shield-orf co fur