Shop replacement repair parts for Amana Packaged Unit/RTU model PGB042075-1B/PGB042100-1A

Furnace flame sensor. The flame sensor monitors the burner to detect whether or not a flame is present. If the flame sensor is defective, the furnace may not heat.

Run capacitor, round 440 volt 45/5 uf

Contactor, 2 pole, 30 amp, 24 vac **Special Note** This may replace single pole contactor and require a technican to install (based on model #)

Fan Motor 0131M00847S. One-speed, OEM replacement part designed specifically for Goodman and Amana HVAC equipment, like air conditioners, furnaces, and heat pumps. It operates at 1/4 HP, with electrical specifications of 208/230V and 1.4A and a rotation speed of 1075 RPM.

Gas valve, 24v 3.5" wc

Single, round, 370 volts, 12.5 microfarads

Flame rollout switch, L350F

10"x8" blower wheel

Ignition control board. The ignition control board regulates the supply of power to the furnace components. Be sure to check more commonly defective parts before replacing the control board.

Square to round chimney kit

Direct spark ignitor

1/2HP 208-230Volts 60Hz 2.7/3.6 amp 1075/950 RPM's 2 Speed Open Enclosure Single Phase CCW 3.5" Shaft

Burner kit 4-cell

Draft Inducer blower motor with gasket (Ventor assembly). The draft inducer motor draws air into the burner and exhausts it out the flue. If the draft inducer motor is defective, the furnace may not heat.

Control box pnl w/paint(1.5-3)