Restore your CKL24-1D central air conditioner running efficiently with genuine OEM replacement parts from Repair Clinic. The CKL24-1D is a two-ton residential outdoor condensing unit using R-410A Puron refrigerant. The CKL24-1D is a production configuration within the Goodman CKL24 two-ton residential outdoor series alongside the CKL24-1L. Most service components including the dual run capacitor and contactor are shared between these configurations. The dual run capacitor, contactor, and outdoor fan motor account for the vast majority of service calls. Repair Clinic stocks genuine Goodman OEM parts for the CKL24-1D including the Goodman capacitor parts, Goodman contactor parts, Goodman fan motor parts, and Goodman high-pressure switch parts. Browse the Goodman central air conditioner parts catalog filtered by CKL24-1D for the complete parts inventory.
CKL24-1D: Two-Ton Outdoor Condensing Unit Service
Annual capacitance testing of the dual run capacitor before the cooling season is the most cost-effective preventive maintenance step for the CKL24-1D. Match all microfarad values from the installed capacitor label before ordering a replacement. The central air conditioner repair help section covers capacitor testing and contactor diagnosis for this platform.
Most Replaced Parts on the CKL24-1D
Dual Run Capacitor for the CKL24-1D
The dual run capacitor provides starting and running torque for both the compressor and outdoor fan motor. A reading more than 10% below the rated value causes the compressor to hard-start. Match all three microfarad values from the installed capacitor label before ordering.
CKL24-1D Contactor
The contactor closes the 240-volt compressor circuit at every cooling cycle start. Pitted or burned contacts generate heat that transfers to the compressor motor terminals. Replace a contactor with visibly eroded contacts before compressor winding damage occurs.
Outdoor Fan Motor for the CKL24-1D
The outdoor fan motor pulls air through the condenser coil. Test the run capacitor before ordering a replacement motor, as a failed capacitor produces identical slow-start symptoms at a fraction of the motor replacement cost.
High-Pressure Switch for the CKL24-1D
A high-pressure switch that trips repeatedly under normal ambient conditions points to a blocked condenser coil, failed fan motor, or refrigerant overcharge rather than a failed switch diaphragm.
Why Choose Repair Clinic for CKL24-1D Parts
- Genuine Goodman CKL OEM Components: Two-ton dual run capacitors, contactors, and fan motors confirmed for the CKL24-1D with CKL24-1L cross-reference Goodman central air conditioner parts.
- R-410A Puron Platform: The CKL24-1D uses R-410A refrigerant. Refrigerant circuit service requires EPA 608 certified technicians.
- Annual Capacitor Testing Priority: Pre-season capacitance testing is the most cost-effective preventive maintenance step for the CKL24-1D.
- 365-Day Returns: Return any uninstalled part within a full year of purchase with no restocking fees.
CKL24-1D Parts FAQ
What is the CKL24-1D and what ton size is it?
The CKL24-1D is a two-ton residential outdoor condensing unit using R-410A Puron refrigerant. The CKL24-1D is a production configuration within the Goodman CKL24 two-ton residential outdoor series alongside the CKL24-1L. Most service components including the dual run capacitor and contactor are shared between these configurations.
Why does my CKL24-1D hum but not start?
A unit that hums but does not start has most commonly failed at the dual run capacitor. Test the capacitor with a digital capacitance meter before testing any other component.
Are Goodman CKL24-1D and CKL24-1L parts interchangeable?
The CKL24-1D and CKL24-1L are different production configurations within the same two-ton CKL24 Goodman platform. The dual run capacitor, contactor, and outdoor fan motor are typically shared between both configurations. The control board designation may differ.
How often should I test the capacitor on the CKL24-1D?
Test the capacitor annually before the cooling season. A reading more than 10% below the rated microfarad value indicates a weakening capacitor that should be replaced before it fails under peak summer load.
