Shop replacement repair parts for Goodman Packaged Unit/RTU model GPG10360901A

Furnace flame sensor. The flame sensor monitors the burner to detect whether or not a flame is present. If the flame sensor is defective, the furnace may not heat.

Contactor, 2 pole, 30 amp, 24 vac **Special Note** This may replace single pole contactor and require a technican to install (based on model #)

Fan Motor 0131M00847S. One-speed, OEM replacement part designed specifically for Goodman and Amana HVAC equipment, like air conditioners, furnaces, and heat pumps. It operates at 1/4 HP, with electrical specifications of 208/230V and 1.4A and a rotation speed of 1075 RPM.

Beckett burner

Gas valve, 24v 3.5" wc

300f m/r rollout limit switch

.43 Natural gas burner orifice

Furnace draft inducer motor. The draft inducer motor draws air into the burner and exhausts it out the flue. If the draft inducer motor is defective, the furnace may not heat.

Pressure switch,(-)0.33pr

Ignition control board. The ignition control board regulates the supply of power to the furnace components. Be sure to check more commonly defective parts before replacing the control board.

Nut, acorn 5/16 hex black

Spark igniter

Cap, 15 mfd/440v/oval

dual round 440v 5/55mfd capacitor

Fan blade 22" 3blade 24deg