Shop replacement repair parts for MTD Lawn Mower model 12AVB2J1704/2013

Grass bag frame. If the grass bag is dragging on the ground, or the frame will not stay in position it may be broken or bent and will need to be replaced.

Lawn mower discharge chute. Installing this chute will keep the mulch cover open to discharge the clippings out the side of the mower.

Fuel bowl gasket

Rear trail shield

Rear axle assembly

MTD Spark Plug. The spark plug ignites the fuel and air mixture in the cylinder to power the engine. If the spark plug is burnt, fouled or damaged the engine may not start or may run rough.

Lower handle bar. There are two sets of holes in the bar. The one closest to the flat end is used for shipping. You will use the mounting hole furthest away for normal use.

Hinged mulch plug (or cover) for lawn mower. Note: Mounting screw is not pre threadded. You need to use the original self tapping screw or purchase a new screw in the recommended parts below.

21" Lawn mower mulching blade with star. MTD Genuine Factory Part.

Upper handle. You will have note the location of the existing controls and transfer them to the new handle. The original zip ties will likey need to be cut and replaced with new ones.

MTD flange lock-nut, 1/4-20.

Hex head screw

Blade support

Knob-wing

Screw-shoulder