Price Match GuaranteeKenmore Washer/Dryer Combo 110.97561800 Parts
Shop replacement repair parts for Kenmore Washer/Dryer Combo model 110.97561800
Dryer thermal fuse. Opens at approximately 196°F (91°C). *If open check for air flow issues like plugged exhaust vent or damaged blower wheel
Dryer gas burner valve solenoid set. If the dryer does not heat or heats intermittently the coils could be defective. To test, watch the burner and if the igniter glows for a while and then shuts off without the gas igniting, it usually means one of these coils is bad.
Dryer drum drive motor with pulley
Dryer lint screen assembly. Proper air flow is critical to dryer operation so the filter should be cleaned before every load.
Idler pulley for dryer drum drive belt
Gas dryer sensor for igniter and flame. The sensor is located across from the gas igniter at the dryer’s burner assembly. This flame sensor should be closed for continuity at room temperature. Check for continuity with a multi-meter before replacing.
Dryer tri-ring retainer for drum support rollers.
Motor pulley, 60 hertz
Lint screen housing foam seal
Spring clip, knob
Dryer blower housing foam seal with adhesive backing. 26 in
Dryer front panel retainer clip. 1 clip per pack.
Door seal
Cleaning brush for refrigerators, freezers, dryers and more. This brush is perfect for cleaning condenser coils on refrigeration systems. It is important to regularly clean the condenser coil to ensure the refrigerator is running efficiently.
Shaft for drum support roller, right side
Frequently Purchased Together For This Model
Family-owned and operated since 1912, Burke America Parts Group is the longest-running genuine appliance, HVAC, and outdoor power equipment parts solution in North America. At Repair Clinic, we're proud to be an international brand trusted by the pros as well as the DIY community.
About Repair Clinic