Shop replacement repair parts for Payne Furnace model PG8JEA060135AAJA

Furnace flame sensor. The flame sensor monitors the burner to detect whether or not a flame is present. If the flame sensor is defective, the furnace may not heat.

Flame rollout limit switch re-settable 350F

Nitride Hot Surface Furnace Ignitor

Limit switch non-resettable 101-200F

Furnace draft inducer motor kit. The draft inducer motor draws air into the burner and exhausts it out the flue. If the draft inducer motor is defective, the furnace may not heat.

Furnace blower wheel. 12" X 11.93" 1/2" Bore. The blower wheel blows air out of the furnace and through the house. The blower wheel is attached to the blower motor shaft with a set screw. If the set screw is loose, the blower wheel will wobble on the motor shaft and be noisy as it turns.

Door switch

Pressure switch

24v gas valve 1/2" npt, 3.5" wc., ef32cw210

Sight Glass

Pressure switch, dual

Furnace draft inducer motor. The draft inducer motor draws air into the burner and exhausts it out the flue. If the draft inducer motor is defective, the furnace may not heat.

Heat exchanger kit

Natural gas orifice spud kit, .45, pack of 7. *Should be installed by a certified Carrier repairperson.

.43 MM orifice, pack of 7. *Should be installed by a certified Carrier repairperson.