Shop replacement repair parts for Fasco Furnace model RCC-FASCO-FURNACE

Type: Shaded Pole; Diameter: 3.3"; HP: 1/15; Volts: 115; RPM: 3200; Speeds: 1; Amps: 2.25; Rotation: Clockwise; Bearings: BALL

Blower Motor Type: Shaded Pole; HP: 1/5 - 1/6 - 1/7; Volts: 115; RPM: 1050; Speeds: 3; Amps: 6.7-5.3-4.7; Enclosure: Open Vent.; Rotation: Clockwise; Bearings: Sleeve; Shaft: 1/2 X 4 1/8"; "A" Dimension (inches): 3 7/8"

Type: Shaded Pole; Diameter: 3.3"; HP: 1/20; Volts: 115; RPM: 3000; Speeds: 1; Amps: 2.6; Rotation: Clockwise; Bearings: BALL. The draft inducer motor draws air into the burner and exhausts it out the flue. If the draft inducer motor is defective, the furnace may not heat.

Furnace draft inducer motor. This shaded-pole motor has the following specifications:
Horsepower: 1/30
Voltage: 115
Full-Load Amperage: 1.35
RPM: 3000
Speeds: 1
Rotation: Counterclockwise
Bearing Type: Sleeve
Shaft Length: 2.5”

Draft inducer motor kit
Type: Permanent Split Capacitor; Diameter: 3.3"; HP: 1/25; Volts: 115; RPM: 3450; Speeds: 1; Amps: 0.7; Rotation: Counter Clockwise; Bearings: BALL

Type: Shaded Pole; Diameter: 3.3"; HP: 1/20; Volts: 115; RPM: 3300; Speeds: 1; Amps: 1.8; Rotation: Counter Clockwise; Bearings: BALL

Motor mounting bracket kit

Type: Shaded Pole; Diameter: 3.3"; HP: 1/25; Volts: 115; RPM: 3400; Speeds: 1; Amps: 2.3; Rotation: Counter Clockwise; Bearings: BALL

Furnace draft inducer motor. This shaded-pole motor has the following specifications:
Horsepower: 1/50
Voltage: 115
Full-Load Amperage: 0.95
Hertz: 60
RPM: 3000
Speeds: 1
Rotation: Clockwise
Diameter: 3.3”

Type: Shaded Pole; Diameter: 3.3"; HP: 1/25; Volts: 115; RPM: 3060; Speeds: 1; Amps: 1.5; Rotation: Clockwise; Bearings: Sleeve

Type: Permanent Split Capacitor; Diameter: 3.3"; HP: 1/18; Volts: 115; RPM: 3450; Speeds: 1; Amps: 0.8; Rotation: Counter Clockwise; Bearings: BALL

Type: PSC; HP: 1/3 - 1/4 - 1/5; Volts: 115; RPM: 1075; Speed: 3; Amps: 5.9-4.6-3.8; Enclosure: Open Vent.; Rotation: REV; Bearing Style: SLV; Shaft Dimension: 1/2 X 6; Motor Length: 4 1/4

Type: 3 PHASE; Diameter: 3.3"; HP: 1/70; Volts: 33-110; RPM: 1500-4700; Speeds: VAR.; Amps: 1; Rotation: Clockwise; Bearings: BALL

Diameter:3.3; HP:1/25; Volts:115; RPM:1550; Speed:1; Amps:0.7; Rotation:CW; Bearing Style:SLV; Shaft:; "A" Dimension (inches): The draft inducer motor draws air into the burner and exhausts it out the flue. If the draft inducer motor is defective, the furnace may not heat.

Type: Shaded Pole; Diameter: 3.3"; HP: 1/50; Volts: 115; RPM: 3400; Speeds: 1; Amps: 1.4; Rotation: Clockwise; Bearings: Sleeve