Shop replacement repair parts for Fasco Furnace model RCC-FASCO-FURNACE

Type: Shaded Pole; HP: 1/20 - 1/30 - 1/60; Volts: 115; RPM: 1500; Speeds: 3; Amps: 2-1.7-1.4; Enclosure: Open Vent.; Rotation: Counter Clockwise; Bearings: Sleeve; Shaft: 1/2 X 2 3/4"; "A" Dimension (inches): 4 1/8"

Nameplate CFM: 135; Volts: 115; Frequency: 50/60; Speeds: 1; RPM @ Free Air: 2600; Amps @ Free Air: 1.3; Bearings: Sleeve

Type: Permanent Split Capacitor; Diameter: 3.3"; HP: 1/12; Volts: 208-230; RPM: 3200; Speeds: 1; Amps: 0.55; Rotation: Clockwise; Bearings: BALL

Type: Permanent Split Capacitor; Diameter: 3.3"; HP: 1/12; Volts: 230; RPM: 3200; Speeds: 1; Amps: 0.44; Rotation: Clockwise; Bearings: BALL

Type: Permanent Split Capacitor; Diameter: 3.3"; HP: 1/24; Volts: 115; RPM: 3450; Speeds: 1; Amps: 0.7; Rotation: Clockwise; Bearings: Sleeve The draft inducer motor draws air into the burner and exhausts it out the flue. If the draft inducer motor is defective, the furnace may not heat.

Diameter:3.3; HP:1/25; Volts:115; RPM:3000; Speed:1; Amps:1.5; Rotation:CW; Bearing Style:SLV; Shaft:; "A" Dimension (inches):

Type: Permanent Split Capacitor; Diameter: 3.3"; HP: 1/24; Volts: 208-230; RPM: 3500; Speeds: 1; Amps: 0.28; Rotation: Clockwise; Bearings: BALL

Type: Permanent Split Capacitor; Diameter: 3.3"; HP: 1/8; Volts: 208-230; RPM: 3500; Speeds: 2; Amps: 0.62; Rotation: Clockwise; Bearings: BALL

Type: Permanent Split Capacitor; Diameter: 3.3"; HP: 1/18; Volts: 208-230; RPM: 3500; Speeds: 2; Amps: 0.62; Rotation: Clockwise; Bearings: BALL

Type: Shaded Pole; Diameter: 3.3"; HP: 1/35; Volts: 208-230; RPM: 2500/3000; Speeds: 1; Amps: .58/.6; Rotation: Counter Clockwise; Bearings: BALL

Type: Shaded Pole; Diameter: 3.3"; HP: 1/50; Volts: 115; RPM: 3400; Speeds: 1; Amps: 1.36; Rotation: Clockwise; Bearings: Sleeve

Type: Shaded Pole; Diameter: 3.3"; HP: 1/25; Volts: 208-230; RPM: 3200; Speeds: 1; Amps: 0.62; Rotation: Clockwise; Bearings: Sleeve The draft inducer motor draws air into the burner and exhausts it out the flue. If the draft inducer motor is defective, the furnace may not heat.

Type: Shaded Pole; Diameter: 3.3"; HP: 1/16; Volts: 230; RPM: 3000; Speeds: 1; Amps: 0.83; Rotation: Counter Clockwise; Bearings: BALL

Type: Shaded Pole; Diameter: 3.3"; HP: 1/25; Volts: 115; RPM: 3000; Speeds: 1; Amps: 1.5; Rotation: Clockwise; Bearings: Sleeve

Type: Shaded Pole; Diameter: 3.3"; HP: 1/25; Volts: 115; RPM: 3200; Speeds: 1; Amps: 1.35; Rotation: Clockwise; Bearings: Sleeve