Shop replacement repair parts for Payne Central Air Conditioner model PA13NR03600GBLAA

Motor,fan 1/5 hp 1 phase

Compressor plug assembly

Harness assembly
Keep your Payne PA13NR03600GBLAA heat pump running reliably with genuine OEM replacement parts from Repair Clinic. The PA13NR03600GBLAA is a three-ton, 13 SEER R-410A residential heat pump outdoor unit from Payne, a Carrier family brand. The NR designation identifies this as a heat pump, distinguishing it from the NA-designated cooling-only condensing units in the same Payne product line. As a year-round heat pump the PA13NR03600GBLAA accumulates more annual compressor operating hours than cooling-only units. Repair Clinic stocks genuine Payne OEM parts for the PA13NR03600GBLAA including the Payne capacitor parts, Payne contactor parts, Payne fan motor parts, and Payne high-pressure switch parts. Browse the Payne central air conditioner parts catalog filtered by PA13NR03600GBLAA for the complete parts inventory.
The Payne PA13NR03600GBLAA is a three-ton heat pump outdoor unit sharing its platform with the Carrier equivalent at the same configuration. As a year-round dual-mode system the PA13NR03600GBLAA accumulates roughly twice the annual compressor operating hours of a cooling-only unit, making annual pre-season capacitor testing especially important. The reversing valve is the heat-pump-specific component directing refrigerant flow for both heating and cooling modes.
As a year-round heat pump the PA13NR03600GBLAA accumulates more annual compressor hours than cooling-only units. Test the capacitor annually before both cooling and heating seasons. Match all three microfarad values from the installed capacitor label before ordering.
Year-round operation in both heating and cooling modes accelerates contactor contact erosion faster than in cooling-only applications. Replace a contactor with visibly eroded contacts before compressor winding damage occurs.
The outdoor fan motor runs year-round in both heating and cooling modes. Test the run capacitor before ordering a replacement motor.
The reversing valve directs refrigerant flow for heating in winter and cooling in summer. A valve stuck in one mode causes the heat pump to heat in summer or cool in winter. Test the reversing valve solenoid coil for continuity before condemning the valve itself.
The Payne PA13NR03600GBLAA is a three-ton, 13 SEER R-410A residential heat pump outdoor unit. The NR designation in the model number distinguishes it as a heat pump from the NA designation used on Payne cooling-only condensing units. Payne is a Carrier family brand.
A heat pump runs year-round in both heating and cooling modes, accumulating roughly twice the annual compressor and fan operating hours of a cooling-only unit. The reversing valve is a heat-pump-specific component that directs refrigerant flow for either heating or cooling and is not present in cooling-only units.
Yes. Payne is a Carrier family brand. The PA13NR03600GBLAA and its Carrier equivalent at the same three-ton heat pump configuration share the same platform engineering and all service components are fully interchangeable between both brand designations.
Test the capacitor annually before both the cooling and heating seasons. As a year-round heat pump the capacitor accumulates more operating hours than cooling-only units.

Family-owned and operated since 1912, Burke America Parts Group is the longest-running genuine appliance, HVAC, and outdoor power equipment parts solution in North America. At Repair Clinic, we're proud to be an international brand trusted by the pros as well as the DIY community.
About Repair Clinic