Payne Central Air Conditioner PA13NR03600GBLAA Parts

Shop replacement repair parts for Payne Central Air Conditioner model PA13NR03600GBLAA

icons/central air condenser
Brand:Payne
Model:PA13NR03600GBLAA
Product:Central Air Conditioner
29 results
Skill Level (2)
skill level dotskill level dotskill level dotskill level dot
Product is a manufacturer part
HN51KC024 Contactor
$71.91

You need Contactor HN51KC024 if you're having trouble with the compressor or fan motor on your air conditioner, furnace, heat pump, or air handler. This genuine OEM single-pole, 24-volt coil contactor has a full load amps (FLA) rating of 30 amps and a locked rotor amps (LRA) rating of 150 amps.

Go

Payne PA13NR03600GBLAA Problems & Repair Solutions

There are only a handful of issues that crop up with most appliances and equipment. Since 1912, we've learned to recognize the most common Payne PA13NR03600GBLAA problems ― and their solutions. Do any of these look familiar?

Frequently Purchased Together For This Model

Contactor
Dual Run Capacitor
Nut
Grommet

Keep your Payne PA13NR03600GBLAA heat pump running reliably with genuine OEM replacement parts from Repair Clinic. The PA13NR03600GBLAA is a three-ton, 13 SEER R-410A residential heat pump outdoor unit from Payne, a Carrier family brand. The NR designation identifies this as a heat pump, distinguishing it from the NA-designated cooling-only condensing units in the same Payne product line. As a year-round heat pump the PA13NR03600GBLAA accumulates more annual compressor operating hours than cooling-only units. Repair Clinic stocks genuine Payne OEM parts for the PA13NR03600GBLAA including the Payne capacitor parts, Payne contactor parts, Payne fan motor parts, and Payne high-pressure switch parts. Browse the Payne central air conditioner parts catalog filtered by PA13NR03600GBLAA for the complete parts inventory.

PA13NR03600GBLAA: Payne Three-Ton 13 SEER R-410A Heat Pump and Carrier Platform Equivalence

The Payne PA13NR03600GBLAA is a three-ton heat pump outdoor unit sharing its platform with the Carrier equivalent at the same configuration. As a year-round dual-mode system the PA13NR03600GBLAA accumulates roughly twice the annual compressor operating hours of a cooling-only unit, making annual pre-season capacitor testing especially important. The reversing valve is the heat-pump-specific component directing refrigerant flow for both heating and cooling modes.

Most Replaced Parts on the Payne PA13NR03600GBLAA

Dual Run Capacitor for the PA13NR03600GBLAA

As a year-round heat pump the PA13NR03600GBLAA accumulates more annual compressor hours than cooling-only units. Test the capacitor annually before both cooling and heating seasons. Match all three microfarad values from the installed capacitor label before ordering.

PA13NR03600GBLAA Contactor

Year-round operation in both heating and cooling modes accelerates contactor contact erosion faster than in cooling-only applications. Replace a contactor with visibly eroded contacts before compressor winding damage occurs.

Outdoor Fan Motor for the PA13NR03600GBLAA

The outdoor fan motor runs year-round in both heating and cooling modes. Test the run capacitor before ordering a replacement motor.

Reversing Valve for the PA13NR03600GBLAA

The reversing valve directs refrigerant flow for heating in winter and cooling in summer. A valve stuck in one mode causes the heat pump to heat in summer or cool in winter. Test the reversing valve solenoid coil for continuity before condemning the valve itself.

Why Choose Repair Clinic for Payne PA13NR03600GBLAA Parts

  • Genuine Payne Heat Pump OEM Components: Dual run capacitors, contactors, and reversing valves confirmed for the PA13NR03600GBLAA three-ton heat pump with Carrier cross-reference Payne central air conditioner parts.
  • NR Heat Pump vs NA Cooling-Only Distinction: The PA13NR designation identifies this as a heat pump. The reversing valve is a heat-pump-specific component not present in PA13NA cooling-only units.
  • Year-Round Elevated Wear Context: Heat pump dual-mode year-round operation doubles annual compressor hours compared to cooling-only units. Pre-season capacitor testing before both seasons is documented as the most cost-effective preventive step.
  • 365-Day Returns: Return any uninstalled Payne part within a full year of purchase with no restocking fees.

Payne PA13NR03600GBLAA Heat Pump Parts FAQ

What is the Payne PA13NR03600GBLAA and what type of unit is it?

The Payne PA13NR03600GBLAA is a three-ton, 13 SEER R-410A residential heat pump outdoor unit. The NR designation in the model number distinguishes it as a heat pump from the NA designation used on Payne cooling-only condensing units. Payne is a Carrier family brand.

How does a heat pump differ from a cooling-only unit in service needs?

A heat pump runs year-round in both heating and cooling modes, accumulating roughly twice the annual compressor and fan operating hours of a cooling-only unit. The reversing valve is a heat-pump-specific component that directs refrigerant flow for either heating or cooling and is not present in cooling-only units.

Is the Payne PA13NR03600GBLAA interchangeable with Carrier heat pump parts?

Yes. Payne is a Carrier family brand. The PA13NR03600GBLAA and its Carrier equivalent at the same three-ton heat pump configuration share the same platform engineering and all service components are fully interchangeable between both brand designations.

How often should I test the capacitor on the Payne PA13NR03600GBLAA?

Test the capacitor annually before both the cooling and heating seasons. As a year-round heat pump the capacitor accumulates more operating hours than cooling-only units.