Shop replacement repair parts for Simplicity Lawn Mower model 1693892

Briggs & Stratton Original Equipment 492932S Oil Filter. Length: 2 1/4 inches. For optimum performance, we recommend changing the oil in your small engine after the first five hours of use. After that, change the oil on a yearly basis or after every 50 hours of use (whichever comes first).

Fuel pump. If this fuel pump is being installed on a Intek V-Twin engine originally equipped with a metal fuel pump, related item 1567967. The fuel pump supplies fuel to the carburetor while the engine is running. If the fuel pump is clogged, the engine may not start or may run rough.

Briggs & Stratton starter gear (also called a pinion gear), 16-tooth, plastic. The starter gear engages the flyhweel to start the engine. If the teeth on the starter gear are worn out, the engine may not start.

Briggs & Stratton in-line fuel filter. If the fuel filter is clogged, it will restrict the flow of fuel to the carburetor. As a result, the engine may not start.

Gasket-float bowl

Briggs & Stratton rocker cover gasket. Be sure that all surfaces are clean and dry before installing this gasket. Do not use solvents or gasket sealer on this gasket.

Briggs & Stratton Original Equipment 100005 4 Cycle Oil. (18oz Bottle) Briggs & Stratton Lawn Mower Oil is formulated for 4-cycle air-cooled engines. Don't overfill the crankcase when adding oil. Too much oil can damage the engine.

Fuel inlet hose connector

Ignition coil (or magneto armature). The ignition coil sends voltage to the spark plug while the engine is running. If the ignition coil is defective, the engine may not start.

Gasket-exhaust

Briggs & Stratton 4-Cycle Engine Oil. (48oz Bottle)
Briggs & Stratton Lawn Mower Oil is formulated for 4-cycle air-cooled engines. For optimum performance, change the oil in your small engine after the first five hours of use and then annually, or every 50 hours of use (whichever comes first).

Bracket, control

Starter motor. When energized, the starter motor's drive gear engages the flywheel to start the engine. (Ensure that the solenoid wire is not being pinched upon installation of the starter, as this will potentially short the circuit)

Briggs & Stratton Spark Plug (QC12YC)

Rod-push (intake)