Price Match GuaranteeYork Furnace G9D10020UPC11 Parts
Shop replacement repair parts for York Furnace model G9D10020UPC11
Furnace hot surface igniter kit. The igniter gets very hot and glows bright orange to light the gas burner. If the igniter is cracked or defective, the furnace won’t heat.
Furnace blower motor. This single-phase motor has the following specifications:
Horsepower: 1
Voltage: 115
Full-Load Amperage: 14.4
Hertz: 60
RPM: 1075
Speeds: 4
Rotation: Counterclockwise
Frame: 48
Enclosure: Open
Shaft Length: 3"
Furnace flame sensor. The flame sensor monitors the burner to detect whether or not a flame is present. If the flame sensor is defective, the furnace may not heat.
Run capacitor, Single, Oval, 370 Volts, 15 Microfarads
Limit switch,160 open,130 close
Transformer, 120 volt primary 24 volt secondary 40 va
Furnace control board. The control board regulates the supply of power to the furnace components. Be sure to check more commonly defective parts before replacing the control board.
Gas valve, 2-stage, J style
Wiring harness
Furnace draft inducer motor. The draft inducer motor draws air into the burner and exhausts it out the flue. If the draft inducer motor is defective, the furnace may not heat.
Blower housing
Pressure Switch, -0.35/-0.65 SPNO contacts close on fall
Hose,drain condensate pan
Relay,time delay 2 stage 24v
Flame rollout limit switch. 200'F open, manual close
Frequently Purchased Together For This Model
Family-owned and operated since 1912, Burke America Parts Group is the longest-running genuine appliance, HVAC, and outdoor power equipment parts solution in North America. At Repair Clinic, we're proud to be an international brand trusted by the pros as well as the DIY community.
About Repair Clinic