Price Match GuaranteeLuxaire Furnace LM8M060A12MP11 Parts
Shop replacement repair parts for Luxaire Furnace model LM8M060A12MP11
Furnace hot surface igniter kit. The igniter gets very hot and glows bright orange to light the gas burner. If the igniter is cracked or defective, the furnace won’t heat.
Furnace flame sensor. The flame sensor monitors the burner to detect whether or not a flame is present. If the flame sensor is defective, the furnace may not heat.
Limit thermostat, 150 open, 110 close
Flame rollout limit switch, push button to re-set
Switch,pres,air,.40iwconfall,spno (text)
Transformer 120v-pri 24v-sec 40va
Furnace blower motor. This single-phase motor has the following specifications:
Horsepower: 1/3
Voltage: 115
Full-Load Amperage: 6.2
Hertz: 60
RPM: 1075
Speeds: 4
Rotation: Counterclockwise LE
Frame: 48
Enclosure: Open
Shaft Length: 4”
Furnace draft inducer motor. The draft inducer motor draws air into the burner and exhausts it out the flue. If the draft inducer motor is defective, the furnace may not heat.
Run capacitor 370 volt 7.5 mfd.
Furnace draft inducer motor. The draft inducer motor draws air into the burner and exhausts it out the flue. If the draft inducer motor is defective, the furnace may not heat.
Furnace control board upgrade kit. The control board regulates the supply of power to the furnace components. Be sure to check more commonly defective parts before replacing the control board.
Transducer,pressure
Harness,wire
Pressure switch, 40iwc on fall, spno
Frequently Purchased Together For This Model
Family-owned and operated since 1912, Burke America Parts Group is the longest-running genuine appliance, HVAC, and outdoor power equipment parts solution in North America. At Repair Clinic, we're proud to be an international brand trusted by the pros as well as the DIY community.
About Repair Clinic