Shop replacement repair parts for GE Washer/Dryer Combo model GUD24GSSJ0WW


Dryer drum slide, pack of two

Dryer bearing slide 2-pack

Push to start switch

Dryer drum seal for the lower front. If the seal is worn the drum glides are likely worn and may need to be replaced. See related items below.

Gas dryer igniter assembly with bracket and wire harness. If the dryer does not heat then the igniter may have burned out. The burned spot is normally visible. Be aware the igniter is very fragile.

Door lid lock & switch assembly

All purpose switch. Commonly used as dishwasher door switch, dryer door or broken belt switch, oven door latch switch and more

High-limit thermostat for dryer. L315-65. If the dryer overheats, this high-limit thermostat will cut off the power to the drive motor. If the high-limit thermostat has blown, the dryer won't start.

Dryer door handle, white

Door switch

The Genuine OEM GE Appliances Cycling Thermostat regulates the internal temperature of the dryer and has limits of 210°F to 30°F. It is recommended to disconnect the appliance from all utilities prior to installation. Compatible with various GE models.

Thermostat, high limit

Lint screen cover grid and guide assembly

Dryer blower wheel. The blower wheel draws air through the dryer and pushes the air out the vent. Clumps of lint, socks, and small articles of clothing can escape the lint filter and get caught in the blower wheel. If an object is caught in the blower wheel, the dryer may make noise.

Cycling thermostat with bias heater