LG Dryer 81538 Parts

Drum Support Roller & Axle Set of 4 AGM75510755 set includes 4 drum rollers, the roller shaft, and mounting clips to ensure quiet operation. As the bearings wear, they self-lubricate, eliminating the need for additional grease. This set is compatible with various dryer models from LG and Kenmore.

Thermostat and thermistor kit. The thermostat has reset button in center that will trip due to poor air flow such as a clogged exhaust vent.

High limit thermostat at blower housing

Dryer thermal fuse. If the dryer overheats, the thermal fuse blows to cut off power to the dryer. If the thermal fuse has blown, the dryer won't start. The thermal fuse cannot be reset—if the fuse has blown, replace it. Thermal fuses often blow due to a clogged vent.

Dryer moisture sensor bar. If the dryer timer does not advance properly inspect the moisture sensor bars for damage which can cause the automatic drying cycle to not work properly.

Dryer idler pulley and spring kit for drum drive belt

Dryer lint filter. Some models have a updated housing. If you need a filter without the notches on top please see related item #4960837.

Lint filter cover *manufacture has modified the part and suggests replacing the filter guide and filter also. Old filter may not fit updated part. See below.

Felt seal, dryer drum

Idler pulley wheel with bearing

Blower wheel

Filter guide

Thermostat

Dryer heating element assembly. If the dryer no longer heats then the heating element may have failed, but it is not the most common cause. The most common cause for a dryer to stop heating is a blown thermal fuse.

Switch assembly, safety