Price Match GuaranteeLG Washing Machine F12A4FNP7 Parts
Shop replacement repair parts for LG Washing Machine model F12A4FNP7
Washer hot water inlet valve. Standard hose fitting inlet, 1 water outlet. The water inlet valve opens to allow water to enter the washing machine. If the water inlet valve is defective, the wash may fill slowly or not fill at all.
Washer door lock latch assembly. The door lock secures the washer door shut during operation. Once the washing machine door is closed, the washer can begin operating. If the door lock is defective, the washer door will not latch properly.
Rear tub bearing. This part is very difficult to install. The manufacturer recommends replacing the complete rear tub and bearing assembly.
Inlet hose
Washing machine tub seal between outer & inner tubs
Washer tub bearing, rear. This part is very difficult to install. The manufacturer recommends replacing the complete rear tub and bearing assembly.
Washing machine stator assembly with sensor
Washing machine drain hose with bellows. This drain hose makes a connection from the washer tub to the drain pump.
Water level pressure switch
Washing machine rotor assembly. The rotor interacts with the stator to create a strong electromagnetic field which rotates the tub in either direction. If the magnets on the rotor are damaged, or if any part of the rotor is defective, the washer may not spin or agitate.
Clamp assembly
Box assembly, liquid detergent
Outer tub vent tube (bellows)
Weight balance with drain port opening
Door Boot Seal
Frequently Purchased Together For This Model
Family-owned and operated since 1912, Burke America Parts Group is the longest-running genuine appliance, HVAC, and outdoor power equipment parts solution in North America. At Repair Clinic, we're proud to be an international brand trusted by the pros as well as the DIY community.
About Repair Clinic