LG Washing Machine WD-12416BD Parts

Washer hot water inlet valve. Standard hose fitting inlet, 1 water outlet. The water inlet valve opens to allow water to enter the washing machine. If the water inlet valve is defective, the wash may fill slowly or not fill at all.

The 6501KW2002B Rotor Position Sensor Assembly is essential for accurately detecting the rotor's position. When this sensor fails, it can trigger an LE error code on the control panel, indicating a malfunction. This sensor is compatible with various Kenmore and LG washer models.

Washing machine tub seal between outer & inner tubs

Washing machine tub seal. Located between the front outer tub and rear outer tub. If the washing machine is leaking water from between these two tubs, this seal is likely damaged or worn out.

Washing machine filter and trap assembly.

Shock Retaining Pin

Washing machine drain hose with bellows. This drain hose makes a connection from the washer tub to the drain pump.

Pump housing. Filter and trap sold separately.

Heating element with sensor probe. Element has been changed. May require new wire harness to install. Please see related item.

Outer tub vent tube (bellows)

Weight balance with drain port opening

Replacement rear outer tub assembly. The stator now mounts directly to the plastic tub without the metal mounting plate. Due to this change the stator and rotor will also need to be replaced. *Heat shield is no longer needed or manufactured.

Main power control board assembly

Washer cold water inlet valve. Standard hose fitting inlet, 1 water outlet. The water inlet valve opens to allow water to enter the washing machine. If the water inlet valve is defective, the wash may fill slowly or not fill at all.

Motor stator with rotor position sensor