LG Washing Machine WD-12433BDM Parts

Washer hot water inlet valve. Standard hose fitting inlet, 1 water outlet. The water inlet valve opens to allow water to enter the washing machine. If the water inlet valve is defective, the wash may fill slowly or not fill at all.

Shock absorber kit

The 6501KW2002B Rotor Position Sensor Assembly is essential for accurately detecting the rotor's position. When this sensor fails, it can trigger an LE error code on the control panel, indicating a malfunction. This sensor is compatible with various Kenmore and LG washer models.

Inlet hose

Washing machine tub seal between outer & inner tubs

Washing machine tub seal. Located between the front outer tub and rear outer tub. If the washing machine is leaking water from between these two tubs, this seal is likely damaged or worn out.

Washing machine filter and trap assembly.

Shock Retaining Pin

Washing machine water inlet and dispenser valve assembly. If the washer does not fill properly the valve may be resticted and need replacement. We do not recommend taking inlet valves apart and trying to clean them due to the risk of failure after repair.

Washing machine drain hose with bellows. This drain hose makes a connection from the washer tub to the drain pump.

Water level pressure switch

Dispenser drawer housing

Washing machine door boot clamp for front panel.

Circulation or drain pump motor & impeller. This pump is found on both washing machines and dishwashers. On washing machines, this pump is used to circulate the water. On dishwashers, it is used to drain water from the dishwasher.

Door boot seal (or door gasket) with drain port. If the washer is leaking, the door boot may be torn. Door boots are commonly torn as a result of overloading the washer.