Shop replacement repair parts for MTD Lawn Mower model 12AVD6RQ719

Brake control cable 37.58"

NGK spark plug. The spark plug ignites the fuel and air mixture in the cylinder to power the engine. If the spark plug is burnt, fouled or damaged the engine may not start or may run rough.

Rear trail shield

Element, air cleaner

Lower handle bar. There are two sets of holes in the bar. The one closest to the flat end is used for shipping. You will use the mounting hole furthest away for normal use.

Hinged mulch plug (or cover) for lawn mower. Note: Mounting screw is not pre threadded. You need to use the original self tapping screw or purchase a new screw in the recommended parts below.

21" Lawn mower mulching blade with star. MTD Genuine Factory Part.

Self-tapping screw. 5/16-18 inches by .75 inches.

MTD flange lock nut, 5/16-18.

Upper handle. You will have note the location of the existing controls and transfer them to the new handle. The original zip ties will likey need to be cut and replaced with new ones.

MTD flange lock-nut, 1/4-20.

Hex head screw

Blade support

Wing knob screw 1/4-20 x 1

Screw-shoulder