Goodman GSX140421KD Central Air Conditioner Parts

Shop replacement repair parts for Goodman Central Air Conditioner model GSX140421KD

icons/central air condenser
Brand:Goodman
Model:GSX140421KD
Product:Central Air Conditioner
26 results
Skill Level (2)
skill level dotskill level dotskill level dotskill level dot
Product is a manufacturer part
CONT2P030024DS Contactor
$36.32

Contactor, 2 pole, 30 amp, 24 vac **Special Note** This may replace single pole contactor and require a technican to install (based on model #)

Skill Level (3)
skill level dotskill level dotskill level dotskill level dot
Product is a bestsellerProduct is a manufacturer part
0131M00060SP Condenser Fan Motor
$155.02

1/6 HP 208-230Volts 60Hertz 1.1Amps 810RPM Single Speed Closed Enclosure 48Y Frame Single Phase CW Rotation 2.5" Shaft

Go

Goodman GSX140421KD Problems & Repair Solutions

There are only a handful of issues that crop up with most appliances and equipment. Since 1912, we've learned to recognize the most common Goodman GSX140421KD problems ― and their solutions. Do any of these look familiar?

Frequently Purchased Together For This Model

Dual Run Capacitor
Contactor
Condenser Fan Motor
Grill Cover

Restore efficient cooling from your Goodman GSX140421KD central air conditioner with genuine OEM replacement parts from Repair Clinic. The gsx140421kd is a 3.5-ton 14-SEER single-stage cooling-only condensing unit in Goodman’s GSX14 series. The goodman gsx140421 base designation covers both the KD and related KF revision suffixes within the 3.5-ton GSX14 output class; most service components are shared across these suffixes. Because the GSX14 is a 3.5-ton unit, the GSX140421KD fan motor and fan blade are sized for the larger condenser coil surface area and are not interchangeable with GSX14 motors and blades from 2-ton, 3-ton, or 4-ton output classes. Parts most frequently replaced include the run capacitor, contactor, condenser fan motor, and fan blade. Use the GSX140421KD parts list and browse the full Goodman central air conditioner parts catalog.

GSX140421KD in the Goodman GSX14 Series: 3.5-Ton Output Class and KD vs KF Revision Suffix

The Goodman GSX140421KD model number decodes as follows: GSX14 identifies the 14-SEER condensing unit series, 042 indicates the 3.5-ton (approximately 42,000 BTU) capacity class, 1 identifies single-stage operation, and KD is the production revision suffix. The goodman gsx140421kf is a later revision within the same 3.5-ton GSX14 output class; most service components are interchangeable between the KD and KF revisions, with control boards the primary exception where the revision suffix may affect part number selection. The GSX14 series is a current-generation 14-SEER platform, distinct from the prior-generation GSC13 (13-SEER) series; GSC13 components are not interchangeable with GSX14 components even at the same tonnage. The GSX140421KD manual documents refrigerant charge specification and component locations. For diagnostic guidance, visit the Goodman air conditioner troubleshooting section.

GSX140421KD Wear Patterns at the 3.5-Ton Output Class

GSX140421KD Capacitor and 3.5-Ton Compressor Startup Stress

The gsx140421kd capacitor is a dual-run unit serving the 3.5-ton compressor and condenser fan motor. A 3.5-ton compressor draws higher locked-rotor amperage during startup than 2-ton or 3-ton units; a degraded capacitor produces a proportionally larger current overload stress per startup at 3.5-ton output, accelerating compressor winding insulation degradation. Annual microfarad testing before cooling season is essential; replace the capacitor immediately when either section reads more than five percent below the rated value. Browse Goodman central air conditioner capacitor parts.

Goodman GSX140421KD Contactor at 3.5-Ton Switching Load

The GSX140421KD contactor switches line voltage to the 3.5-ton compressor and condenser fan motor at every thermostat cooling cycle. At 3.5-ton output the contactor handles higher switching loads than smaller configurations, accelerating contact face erosion. Inspect the contact faces at each annual service; replace proactively every four to five years in warm climates regardless of visual condition. Find compatible options at the Goodman air conditioner contactor page.

GSX140421KD Fan Motor Bearing Wear and 3.5-Ton Coil Heat Rejection

The condenser fan motor on the goodman gsx140421kd drives the fan that moves ambient air through the 3.5-ton coil. A motor with bearing wear runs below rated RPM, reducing coil airflow and raising condensing pressure; at 3.5-ton output, reduced fan speed has a larger absolute impact on cooling capacity than on smaller configurations. Replace the motor at the first sign of bearing noise. Browse Goodman central air conditioner fan motor parts.

GSX140421KD Fan Blade 3.5-Ton Specification and Imbalance Prevention

The GSX140421KD fan blade is pitched for the 3.5-ton condenser coil airflow requirement at the motor’s rated RPM. A blade with physical damage creates imbalance that vibrates the motor bearing during every cooling cycle. Inspect the blade annually and confirm the diameter, pitch, and hub bore from the GSX140421KD parts list before ordering. Browse Goodman air conditioner fan blade parts.

Goodman GSX140421KD Parts at Repair Clinic

  • Genuine Goodman OEM Parts for the GSX14 3.5-Ton Platform: Every GSX140421KD part meets Goodman original equipment specifications. Browse the full Goodman central air conditioner parts catalog.
  • KD and KF Revision Compatibility Notes: Our listings identify components shared between the GSX140421KD and GSX140421KF revisions and those requiring suffix-specific confirmation.
  • GSX14 vs GSC13 Platform Separation: Our catalog clearly distinguishes GSX14 components from GSC13 components, preventing cross-platform substitution errors at the same tonnage rating.
  • Fast Shipping During Cooling Season: In-stock GSX140421KD parts ship promptly, supported by the Goodman air conditioner troubleshooting section.

Goodman GSX140421KD Central Air Conditioner Parts FAQ

Are GSX140421KD and GSX140421KF parts interchangeable?

Most GSX140421KD parts including the run capacitor, contactor, fan motor, and fan blade are interchangeable with the Goodman GSX140421KF within the same 3.5-ton GSX14 output class. Control boards may carry revision-specific part numbers; confirm the KD revision is covered in the specific listing before ordering board components.

What tonnage is the Goodman GSX140421KD?

The goodman gsx140421kd is a 3.5-ton (approximately 42,000 BTU) condensing unit. The 042 in the model number identifies the capacity class. Fan motors and blades must be specified for the 3.5-ton 042 output class; components from other GSX14 tonnage configurations are not interchangeable.

Is the GSX140421KD capacitor the most commonly replaced part?

Yes. The gsx140421kd capacitor is the most frequently replaced service component on this platform. Capacitor dielectric degradation is a cumulative process that accelerates compressor winding stress on each startup cycle; annual testing and proactive replacement when drift exceeds five percent of rated value is the highest-impact preventive maintenance step on the GSX140421KD.

Can I use GSC13 parts on the GSX140421KD?

No. The Goodman GSX14 and GSC13 are different platform generations with different compressor types, coil configurations, and in some cases different control board architectures. Components from the GSC13 series are not interchangeable with GSX14 components even when the tonnage ratings match. Always confirm the GSX14 platform designation when ordering for the GSX140421KD.