Restore your Briggs and Stratton CMXGWAS020733-00 pressure washer to reliable operation with genuine OEM replacement parts from Repair Clinic. The CMXGWAS020733-00 is a gas-powered residential pressure washer with a direct-drive triplex pump. The CMXGWAS prefix identifies this as a CRAFTSMAN-branded model built on the Briggs and Stratton pressure washer platform, with engine and pump components catalogued under the Briggs and Stratton brand. Repair Clinic stocks genuine Briggs and Stratton OEM parts for the CMXGWAS020733-00 including the Briggs and Stratton pressure washer pump parts, Briggs and Stratton pressure washer nozzle parts, and Briggs and Stratton pressure washer carburetor parts. Browse the Briggs and Stratton pressure washer parts catalog filtered by CMXGWAS020733-00 for the complete parts inventory.
Briggs and Stratton CMXGWAS020733-00: CRAFTSMAN-Branded Pressure Washer Pump Service
The CMXGWAS020733-00 is a CRAFTSMAN-branded gas pressure washer built on the Briggs and Stratton platform. Pump seal failure from freeze damage during off-season storage is the most preventable service issue on this platform. Annual winterization with pump saver solution at the end of the season fills the pump cylinders with antifreeze and lubricant. The pressure washer repair help section covers CMXGWAS020733-00 pump seal replacement, unloader valve adjustment, and spray nozzle cleaning.
Most Replaced Parts on the Briggs CMXGWAS020733-00
Pump Seal Set for the Briggs CMXGWAS020733-00
The pump seal set contains the piston and valve seals maintaining pressure inside the pump cylinders. A seal set cracked from freeze damage or worn from use allows water to bypass the pistons, reducing output pressure and producing leaks from the pump body.
Spray Nozzle for the CMXGWAS020733-00
A nozzle orifice enlarged from wear or debris reduces maximum cleaning pressure. Clean nozzles with the provided cleaning wire rather than a drill bit, which enlarges the orifice permanently.
Unloader Valve for the Briggs CMXGWAS020733-00
A stuck-open unloader valve causes the unit to run but produce no pressure at the output. A stuck-closed unloader valve causes pressure surges when the spray trigger is released.
Carburetor for the CMXGWAS020733-00
Ethanol-blend fuel varnish during off-season storage causes most hard-start complaints. Drain the float bowl before storage to prevent this.
Why Choose Repair Clinic for Briggs CMXGWAS020733-00 Parts
- Genuine Briggs and Stratton OEM Components: Pump seal sets, spray nozzles, and carburetors confirmed for the CRAFTSMAN-branded CMXGWAS020733-00 pressure washer Briggs and Stratton pressure washer parts.
- CRAFTSMAN and Briggs and Stratton Platform Context: The CMXGWAS020733-00 is built on the Briggs and Stratton pressure washer platform, with engine and pump components catalogued under Briggs and Stratton.
- Freeze-Damage Prevention: Annual winterization with pump saver solution is documented as the most cost-effective way to prevent the leading cause of off-season pump seal failure.
- 365-Day Returns: Return any uninstalled Briggs and Stratton part within a full year of purchase with no restocking fees.
Briggs and Stratton CMXGWAS020733-00 Pressure Washer Parts FAQ
What is the Briggs and Stratton CMXGWAS020733-00 and what type of unit is it?
The Briggs and Stratton CMXGWAS020733-00 is a gas-powered residential pressure washer with a direct-drive triplex pump. The CMXGWAS prefix identifies this as a CRAFTSMAN-branded model manufactured on the Briggs and Stratton pressure washer platform.
Why does my Briggs CMXGWAS020733-00 lose pressure during use?
Pressure loss during use is most commonly caused by a worn pump seal set allowing water to bypass the pump pistons, a clogged spray nozzle restricting output, or an unloader valve stuck in the bypass position. Inspect and clean the spray nozzle before disassembling the pump.
Why is my Briggs CMXGWAS020733-00 leaking water from the pump?
Water leaking from the pump body indicates a failed pump seal set or a cracked pump housing. Inspect the pump housing for cracks before ordering only the seal set.
How do I winterize the Briggs CMXGWAS020733-00?
Run pump saver solution through the pump until it exits the discharge outlet. This fills the pump cylinders and seals with antifreeze and lubricant that prevents the pump seals from cracking during storage in freezing temperatures.
