Shop replacement repair parts for LG Dryer model DLGX3701W/00

Thermostat and thermistor kit. The thermostat has reset button in center that will trip due to poor air flow such as a clogged exhaust vent.

High limit thermostat at blower housing

Dryer moisture sensor bar. If the dryer timer does not advance properly inspect the moisture sensor bars for damage which can cause the automatic drying cycle to not work properly.

Dryer idler pulley and spring kit for drum drive belt

Dryer lint filter. Some models have a updated housing. If you need a filter without the notches on top please see related item #4960837.

Gas dryer igniter with bracket and wire harness. This is a round spiral-style igniter. The igniter uses heat to ignite the gas in the burner assembly. If the igniter is defective, the gas will not ignite and the dryer will not heat.

Lint filter cover *manufacture has modified the part and suggests replacing the filter guide and filter also. Old filter may not fit updated part. See below.

LP conversion kit *Note: Sticker indicating the gas type is not included.

Felt seal, dryer drum

Dryer leveling leg

Dryer gas burner valve assembly. Two solenoids. When installing the new valve, transfer the orifice from the old valve to the new valve.

Idler pulley wheel with bearing

Blower wheel

Filter guide

Lint screen duct cover spring