Shop replacement repair parts for Samsung Dryer model DV5471AEW/XAA-03

Dryer Heating element. If the dryer does not heat check for a blown thermal fuse or thermal cut out. Heating elements will often have a break in the coil element if defective.

Thermal fuse with bracket, located on the element housing. The fuse is not resettable and will need to be replaced if blown. If the dryer does not heat, the thermal fuse may be blown.

Dryer heating element assembly. If the dryer no longer heats then the heating element may have failed, but it is not the most common cause. The most common cause for a dryer to stop heating is a blown thermal fuse.

Dryer moisture sensor. The moisture sensor monitors the clothing’s moisture level and sends a signal to the control board when the clothes are dry. If your dryer turns off too early or continues running for a while after the clothes are dry, the moisture sensor might be damaged.

Samsung dryer blower Wheel

Idler pulley spring

Retainer

Leveling leg

Lint filter screen cover

Broken belt switch

Motor mounting bracket

Drying rack

Lint filter with screen cover

Lint filter duct with sensor bars

Assy door