Shop replacement repair parts for Amana Dryer model 4KNED3200JW0

The Dryer Repair & Maintenance Kit 4392065 includes rollers, a belt, and an idler pulley. It is specifically designed for 29 wide dryers built in 1965 or later. This kit addresses common issues that cause Whirlpool, Kenmore, Maytag, and KitchenAid dryers to become noisy.

Dryer thermal fuse. Opens at approximately 196°F (91°C). *If open check for air flow issues like plugged exhaust vent or damaged blower wheel

Dryer drum support roller. If the dryer is making a rumbling or knocking noise the rollers may be worn out causing the drum not to turn smoothly.

Door handle, white. Snaps in place

Door catch

Dryer lint screen assembly. Proper air flow is critical to dryer operation so the filter should be cleaned before every load.

Dryer heating element wire connector kit. Wire with spade terminal & wire nut

Dryer timer assembly

Screw, 10-24 x 1/2

Dryer blower housing foam seal with adhesive backing. 26 in

Dryer front panel retainer clip. 1 clip per pack.

Shaft for drum support roller, left side

Dryer vent testing kit is for 29" dryers with a top mounted lint screen. Use the plastic card to hang inside your dryer drum, then run the unit three times empty. If the card stays in place, the venting and dryer need to be cleaned out. Complete instructions are included.

Door Strike

Electric dryer power cord kit, 4 foot 30 Amp 3 wire w/closed eyelets & strain relief