Shop replacement repair parts for Kenmore Dryer model 11072054100

Outer grille

Dryer thermal fuse (or thermal limiter). This fuse is located on the exhaust duct. If the dryer overheats, the thermal fuse opens to cut off power to the dryer. The thermal fuse cannot be reset--if the thermal fuse is open, it must be replaced.

Motor pulley

White Touch Up Paint

Screw, 10-24 x 1/2

Shaft for dryer drum support roller. Rear shaft with left hand threads. Part is updated so nuts may need to be replaced as well on older dryers.

Drive motor kit - Note; the wiring connections may be different, comes with instructions

Seal, blower cover plate. 26 in

Shaft for dryer drum support roller. Front shaft with right hand threads. Part is updated so nuts may need to be replaced as well on older dryers.

Lower panel retainer clip

Spring for idler pulley arm in dryer

Front panel foam seal with adhesive strip

Dryer LP (liquid propane) conversion kit. From Natural gas to LP.

Screw, 10-16 x 7/8

Outlet housing seal with adhesive strip 15 in