Shop replacement repair parts for GE Washer/Dryer Combo model GUD27GEPN0DG

Dryer drum slide, pack of two

Dryer bearing slide 2-pack

Rear drum bearing sleeve

Dryer drum seal for the lower front. If the seal is worn the drum glides are likely worn and may need to be replaced. See related items below.

Gas dryer igniter assembly with bracket and wire harness. If the dryer does not heat then the igniter may have burned out. The burned spot is normally visible. Be aware the igniter is very fragile.

Washing machine drive belt

Drum support shaft and bearing assembly

Door lid lock & switch assembly

All purpose switch. Commonly used as dishwasher door switch, dryer door or broken belt switch, oven door latch switch and more

Door switch

Inlet control thermistor. Resistence reading should be around 100K ohms at room temperature and decrease with temperature rise.

Right side suspension rod

O-Ring for retaining drum bearing sleeve on shaft

Dryer blower wheel. The blower wheel draws air through the dryer and pushes the air out the vent. Clumps of lint, socks, and small articles of clothing can escape the lint filter and get caught in the blower wheel. If an object is caught in the blower wheel, the dryer may make noise.

Screw #10