Shop replacement repair parts for Bosch Dishwasher model SHX46A05UC-14

The Bosch Door Seal 00494772 is a genuine OEM part that seals the gap between the dishwasher tub and the outer edge of the door. It is compatible with various dishwasher models and can be installed without tools.

Cap shaped handle.

Dishwasher dishrack roller. Sold individually. The dishrack rollers enable the dishrack to move in and out of the dishwasher. Because these rollers generally wear out at the same time, we recommend replacing them in pairs.

Dishwasher drain pump. If the water does not drain from the dishwasher then the drain pump may be clogged, damaged, or defective. *You may need to order the related wire connector to install.

The Bosch Lower Door Seal 00432490 is a high-quality OEM part that seals the gap between the dishwasher door and tub. It includes mounting brackets and replaces several original part numbers. Safety precautions should be taken during installation. Compatible with various Bosch dishwasher models.

The Bosch Circulation Pump 00442548 is a high-quality OEM part that moves water through the spray arms to clean dishes in various dishwasher models from Bosch, Gaggenau, Thermador, and Kenmore. Disconnect the appliance from all utilities before installation.

The Bosch Tine Row Clip 00418498 is a high-quality OEM part used in the lower rack of a dishwasher to hold the tine row in place. It allows for the conversion of the rack to accommodate more dishes of different shapes and sizes.

The Bosch Detergent Dispenser Actuator Shaft Kit 00166630 is an OEM part that opens the detergent dispenser cup cover during the dishwashing cycle. It includes a spring and seal and is also known as the Detergent Level Latch Kit. Caution should be taken during installation.

The Bosch Detergent Dispenser Cover 00166623 seals detergent in the dispenser and releases it during the dishwashing cycle. It comes with a gasket for sealing and is compatible with various Bosch dishwasher models. Safety precautions should be taken during installation.

Tine clip kit (also called a bearing) for dishwasher dishrack. Includes (2) bearings (2) sleeves and (4) tine clips.

The Bosch Detergent Dispenser Cover 00166621 seals and dispenses detergent during the dishwashing cycle. It comes with a gasket and is compatible with Bosch and Kenmore brand dishwashers. Safety precautions should be taken during installation.

Door support rope and pulley kit

The Bosch Float Switch 00165256 is an OEM part that shuts off the water fill valve if the water level gets too high before the fill cycle ends. Compatible with many Bosch, Gaggenau, Thermador, and Kenmore brand dishwashers. Replaces several part numbers. Take safety precautions during installation.

The Bosch Upper Dishrack Slide Rail Stop 00165254 is a high quality, genuine OEM part that prevents the upper dishrack from sliding completely off the slide rail. It includes front and rear rack stops and is compatible with various Bosch dishwasher models.

The Bosch Mounting Bracket Set 00170664 is a high quality OEM part that prevents the dishwasher from tilting forward. It includes 2 metal brackets and is compatible with various Bosch dishwasher models. Hardware is not included and safety precautions should be taken during installation.