Shop replacement repair parts for Maytag Washer/Dryer Combo model MLE22PDAGW0

Dryer thermal fuse. Opens at approximately 196°F (91°C). *If open check for air flow issues like plugged exhaust vent or damaged blower wheel

Dryer drum support roller. If the dryer is making a rumbling or knocking noise the rollers may be worn out causing the drum not to turn smoothly.

Dryer thermistor. This thermistor should read approximately 11.9K Ohms of resistance at 70 degrees Fahrenheit (21’ Celsius). If the thermistor is defective, it may prolong or shorten the drying time or cause a fault code. A defective thermistor is not responsible for a dryer not heating.

Dryer heating element wire connector kit. Wire with spade terminal & wire nut

White Touch Up Paint

Washer drain hose extension kit. Used to extend washing machine drain hose approximately 4 feet. *Also, order the required adapter to connect the extension to the existing drain hose.

Spray Paint - White

Terminal block connection and wire kit, main power

Side or bottom venting kit

Screw and nut kit, electric dryer cord connector.

Screw, 8-18 x 5/8

Handle-dispenser, ext

Spray paint flo-coat gray, 12 ounces. *Can be used to re-coat dryer drums.

Screw, 6-20 x 1 3/8

Bracket, gas pipe