Price Match GuaranteeWhirlpool Dryer YWED5010LW1 Parts
Shop replacement repair parts for Whirlpool Dryer model YWED5010LW1
Dryer drum drive belt. This belt is approximately 1/4" wide x 92-1/4" long. It is flat on one side and has 4 ribs and 3 grooves on the other. It replaces many other belts, including some with 5 ribs and 4 grooves. The belt attaches to the motor pulley and spins the drum as the motor rotates
Dryer thermal fuse. Opens at approximately 196°F (91°C). *If open check for air flow issues like plugged exhaust vent or damaged blower wheel
Dryer electric heating element assembly
Dryer thermistor. This thermistor should read approximately 11.9K Ohms of resistance at 70 degrees Fahrenheit (21’ Celsius). If the thermistor is defective, it may prolong or shorten the drying time or cause a fault code. A defective thermistor is not responsible for a dryer not heating.
Dryer heating element wire connector kit. Wire with spade terminal & wire nut
Thermal Fuse & High Limit thermostat kit, heater duct
Terminal block connection and wire kit, main power
Screw and nut kit, electric dryer cord connector.
Bracket,light
Bolt, 3405245 5/16-18 x 3/4
RC Item #4994856
Hinge top
Seal
Clip-strain relief
Panel clip nut
Panel-rear
Frequently Purchased Together For This Model
Family-owned and operated since 1912, Burke America Parts Group is the longest-running genuine appliance, HVAC, and outdoor power equipment parts solution in North America. At Repair Clinic, we're proud to be an international brand trusted by the pros as well as the DIY community.
About Repair Clinic