Price Match GuaranteeMaytag Washing Machine MVWC416FW0 Parts
Shop replacement repair parts for Maytag Washing Machine model MVWC416FW0
Drive Clutch (Splutch) Kit. This kit has 6 parts; a spring, housing, cam ring, basket drive gear, pulley, and nut. The pulley is driven by the belt and the splutch works with the mode shift actuator to drive the washplate and spin the inner basket. A worn splutch can cause spin or washplate problems
Mode shift actuator with 6 pin wire connection
Washer main drive belt. This belt is located under the washing machine and is used to drive the splutch pulley. It goes around the motor & splutch pulleys. Worn or broken drive belt can cause spin or washplate problems.
Lid lock latch assembly. The part might arrive in the locked position. Per the manufacturer install the lid lock & power up washing machine to reset lock to the open position.
Washing machine drain pump. *Coin trap only available with pump assembly. If the washer does not drain the pump could be locked up or a small object may be clogging it. Also a small leak in front of the washer could be caused by a defective pump.
Drain pump assembly
Transmission assembly with shaft, seal & bearing
Package of two 5-foot-long Industrial Braid hoses with pre-installed washers and straight ends. It is recommended to replace washing machine inlet hoses after 5 years of use to reduce the risk of hose failure.
Residential Washer Hoses- Fits most major washer brands.
• Provides hot & cold water to the washer
• (2) 4 Ft. hoses for hot & cold water
• (4) Hose washers
• Anti-leak crimp
It is recommended to replace washing machine inlet hoses after 5 years of use to reduce the risk of hose failure.
Suspension rod kit
Washing machine main drive motor, 1/3 HP
Package of two 6-foot-long Industrial Braid hoses with pre-installed washers and 90' ends. It is recommended to replace washing machine inlet hoses after 5 years of use to reduce the risk of hose failure.
Two 5 foot long rubber washing machine fill hoses with washers. It is recommended to replace washing machine inlet hoses after 5 years of use to reduce the risk of hose failure.
Commercial Grade Washer Hoses- Fits most major washer brands. Includes everything you need for easy installation including: • Universal connectors fit most major brands • (2) 4.5 Ft. water supply lines • (4) Hose Washers
Ten foot washing machine fill hose set for both hot and cold water. Set includes pre-Installed high quality Washers, and are 1050 PSI burst strength.
Frequently Purchased Together For This Model
Family-owned and operated since 1912, Burke America Parts Group is the longest-running genuine appliance, HVAC, and outdoor power equipment parts solution in North America. At Repair Clinic, we're proud to be an international brand trusted by the pros as well as the DIY community.
About Repair Clinic