Maytag Washing Machine Parts

Common Maytag Washing Machine Parts & Symptoms

Maytag washers — whether you're running a Bravos top-load or an older Neptune front-loader — eventually need repairs. The good news: most fixes are straightforward once you identify the problem. Loud grinding during the spin cycle? That's usually the tub bearing. Won't drain or agitate? Pump or shift actuator. Our Maytag washing machine parts inventory covers every major failure point across decades of models.

Maytag's direct-drive Bravos and Centennial washers are known for toughness, but tub bearings on the Bravos and older Neptune models do fail — often with a roaring, grinding noise that gets worse. On front-loaders, door boot seals and drain issues are common. The control board handles every cycle, so when error codes appear or cycles won't start, that's usually where the problem lives.

• Won't spin or agitate: Lid switch (top-load), shift actuator (Bravos/Centennial), drive belt, motor coupling
• Loud grinding/rumbling during spin: Tub bearing, rear drum assembly (Neptune front-load especially common)
• Won't drain: Drain pump, pump filter, kinked drain hose
• Water leaks from door: Door boot seal/gasket (front-load), tub seal
• Error codes or no response: Main control board, lid switch (safety interlock)

Maytag Washing Machine Repairs: FAQs

Why is my Maytag Bravos washer making a loud grinding noise?

That grinding or roaring sound during the spin cycle is almost always the tub bearing. The bearing supports the outer tub as the inner drum spins at high speed. When it fails, friction increases and noise gets louder with each cycle. On Maytag Bravos and Centennial models, the bearing often comes as part of the rear drum assembly. It's a bigger job than smaller parts, but it's the correct OEM repair. Ignoring it risks damage to the tub itself.

What's the difference between Maytag Bravos, Centennial, and Neptune parts?

Maytag's model lines have different part ecosystems. Bravos washers (top-load, direct-drive, high-capacity) and Centennial washers (value top-load, direct-drive) share some parts but not all — especially drive belts, shift actuators, and bearing assemblies. Neptune washers are older front-load machines with their own parts lineup, especially notorious for tub bearing failures. Always enter your full model number to get the right parts for your specific line. A Bravos bearing won't fit a Centennial, even though both are Maytag.

My Maytag won't start — is it the lid switch or the control board?

Start with the lid switch (top-load models). It's a safety interlock — if the lid doesn't close properly or the switch fails, the washer won't start. It's inexpensive and easy to test with a multimeter for continuity. If the switch checks out but the washer still won't start, or if you're seeing error codes on the display, the main control board is likely the culprit. Front-load Maytag washers have a door latch assembly that serves the same function. Check the latch engagement before replacing the board.

How do I know if my Maytag needs a new drain pump?

Standing water after a cycle is the primary sign. If water won't drain at all, check the drain filter (trap) first — lint clogs it regularly. If the filter is clear and water still sits in the tub, the pump has failed. A humming sound without water movement also points to pump failure. Always verify the drain hose isn't kinked or blocked before ordering a pump. On some models, you'll also hear a buzzing sound if the pump motor is stuck. OEM Maytag drain pumps are reliable replacements — they're designed for your exact model's plumbing.

Order Maytag Washing Machine Parts Online

Ordering Maytag washing machine parts online is simple and helps you find genuine OEM parts for your unit. With same-day shipping on most in-stock items, you'll have your replacement part fast, minimizing downtime. Our model/part number lookup finds the exact OEM part for your unit, and every order is backed by our 365-day return policy and price-match guarantee. Browse our repair help section for troubleshooting tips, part testing guides, and step-by-step installation videos for your specific product.

Maytag Washing Machine Model Number: Where to Look

Maytag places the model number on a label inside the door frame or along the top edge of the tub opening on many washing machines. Top-load models may also list it on the back panel, while some front-load models have the label near the door opening. Look for a sticker or metal plate showing the model and serial numbers, then enter the complete model number in the model number search. The catalog will narrow to parts made for your entire Maytag washer, across every part category. Using the full number helps separate Bravos, Centennial, Neptune, and other model variations, so you can order with confidence knowing the fit is right.