Keep your Broan S130 bathroom fan running quietly with genuine OEM replacement parts from Repair Clinic. The Broan S130 is a ceiling-mounted bathroom exhaust fan designed for moisture and odor removal, using a motor-driven impeller and a duct connection to exhaust air to the exterior. The motor is the most commonly replaced part because bearing wear from continuous operation eventually produces the grinding or squealing noise that drives most S130 service calls. Repair Clinic stocks genuine Broan OEM parts for the S130 including the replacement motor, fan blade, and grille assembly. Browse the Broan range hood parts catalog filtered by S130 for the complete parts inventory.
Broan S130: Three-Component Service Universe
The Broan S130 has a straightforward service universe: the motor, fan blade, and grille are the only components that wear or fail. When the fan produces noise, start by cleaning the fan blade, accumulated dust creates imbalance without any motor problem. If cleaning the blade does not resolve the noise, the motor bearing has worn and requires replacement. The bathroom fan repair help section covers S130 motor replacement and grille access procedures.
Most Replaced Parts on the Broan S130
Replacement Motor for the Broan S130
As the motor bearing wears, it produces the grinding or squealing noise that is the primary complaint on this model. The replacement motor for the S130 is specific to this housing design and should be ordered using the full model number S130 to ensure the correct shaft length and mounting configuration.
Fan Blade for the Broan S130
A blade that has accumulated heavy dust runs out of balance, producing vibration and noise. Cleaning the blade with a damp cloth often resolves vibration without parts expense.
Grille Assembly for the Broan S130
The grille on the Broan S130 attaches to the housing with spring clips that pull straight down for removal. A yellowed, cracked, or damaged grille can be replaced without touching the motor or fan blade.
Why Choose Repair Clinic for Broan S130 Parts
- Genuine Broan OEM Components: S130 and S130A motors, fan blades, and grille assemblies catalogued together regardless of formatting — Broan range hood parts.
- Simple Motor Access Guides: Spring-clip grille removal and motor replacement instructions specific to the S130 ceiling housing design.
- Complete Replacement Parts: Motor, blade, and grille available in a single order for a complete S130 rebuild.
- 365-Day Returns: Return any uninstalled Broan part within a full year of purchase with no restocking fees.
Broan S130 Bathroom Fan Parts FAQ
What motor fits the Broan S130 bathroom fan?
The Broan S130 uses a replacement motor specific to this exhaust fan model, listed on the Repair Clinic S130 product page under the Motor category. Always confirm the full model number S130 from the fan housing label before ordering.
Is the Broan S130 the same as the S130A?
Yes. The S130 and S130A are alternate formatting of the same Broan bathroom exhaust fan model number. Both designations reference the same motor, fan blade, and grille components.
How do I replace the motor in a Broan S130?
Turn off the circuit breaker serving the fan. Remove the grille by releasing its spring clips. Disconnect the motor plug inside the housing. Remove the fan blade from the motor shaft and unscrew the mounting screws. Install the replacement motor in reverse order.
Why is my Broan S130 fan making noise?
Noise is most commonly caused by a fan blade that has accumulated dust and is running out of balance, or worn motor shaft bearings producing a grinding or squealing sound. Clean the fan blade first before considering motor replacement.
